Exploration Update - Lake Johnston Lithium Project
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
RELEASED 6 JUNE 2024
Exploration Update
Lake Johnston Lithium Project WA
■
Program of Work applications approved for drilling of lithium pegmatite
targets at Jaegermeister and Burmeister
■
Additional soil sampling defines a new lithium drill target
■
Seismic survey interpretation underway
■
Metallurgical testwork progressing
TG Metals Limited (TG Metals or the Company) (ASX:TG6), is pleased to provide this update on
exploration on the Lake Johnston Project, Western Australia.
Program of Work (PoW) applications have been approved by DEMIRS for infill drilling to 100m x 100m at
the Burmeister lithium deposit and for the maiden drilling program at Jaegermeister. Drill pad clearing
contractors have mobilised to site and drill rig mobilisation is expected to occur mid-June. Two RC drilling
rigs will be deployed to Jaegermeister Targets A and B and Burmeister infill drilling. This is to make up for
delays experienced due to inclement weather interruptions and a longer than expected environmental
approval process.
The Company has completed infill soil sampling at the Jaegermeister prospect which has resulted in the
definition of a new anomaly, Target E, see Figures 1 and 2. This anomaly lies to the north of Target A and
has been included in the coverage of the recently acquired seismic field data. Consequently, the number
of priority drilling targets has expanded to five (5) at Jaegermeister.
The results from the recently completed seismic survey are in the final stages of interpretation. The
interpretations are being conducted by expert independent consultants and are expected to be available
within two weeks. The interpretations will guide the existing planned drilling and new phases of drilling over
both Burmeister and Jaegermeister, the seismic coverage is shown in Figure 1. The geological model will
be continually updated as drilling data comes in and is matched to the seismic interpretation.
The first stage of metallurgical testwork has been completed, preparing the composite drill core samples
for Heavy Liquid Separation (HLS) and Flotation tests by removing basalt wall rock via ore sorting. This
“pre-conditioning” has become standard for lithium pegmatite where the baren wall rock is easily
distinguishable from the pegmatite host. Results of these tests will be reported once finalised.
TG Metals CEO, Mr. David Selfe stated; “The team is excited to recommence drilling. In particular, the first
holes into the priority targets at the Jaegermeister prospect, are greatly anticipated. Further soil sampling
has grown and improved the Jaegermeister targets, which contains multiple soil anomalies bigger than the
Burmeister Lithium Deposit initially presented.
With such a large area of lithium soil anomalism to drill test, we’re confident that the use of seismic
geophysics will fast-track our targeting. We’ve completed two reconnaissance 2D seismic lines; one along
the Burmeister trend and a longer one along the Jaegermeister trend. If successful, this technique will not
only minimise the drilling required for further discovery and resource definition, but it will also provide a
very good understanding of the pegmatite system at Lake Johnston and its size potential.
TG METALS LTD
ASX TG6
ABN 40 644 621 830
Level 2, 28 Ord Street
West Perth WA 6005
T: +61 8 6211 5099
W: www.tgmetals.com.au
1
ASX ANNOUNCEMENT
ASX ANNOUNCEMENT
I
RELEASED 6 JUNE 2024
________________________________________________________________
Figure 1 – Lithium soil anomalies showing new Target E. Datum: Zone 51 (AGD84)
TG METALS LTD
ASX TG6
ABN 40 644 621 830
Level 2, 28 Ord Street
West Perth WA 6005
T: +61 8 6211 5099
W: www.tgmetals.com.au
2
ASX ANNOUNCEMENT
ASX ANNOUNCEMENT
I
RELEASED 6 JUNE 2024
________________________________________________________________
Soil Sampling Infill
Soil sampling previously conducted and reported in ASX announcement 20 March 2024, was infilled with
further soil sampling to better define the lithium soil anomalies. This was primarily conducted over targets
A, B and the newly defined Target E, see Figure 2 for previous results and new results. The results have
improved the definition of the Targets A and B anomalies which have expanded from the previous
interpretations and has increased the confidence in the area now known as Target E. Whilst the new Target
E has lesser numbers of samples above 120ppm Li2O than the other targets, the location is on a
topographic high and the elongated shape in a NW-SE direction typifies the soil anomalies present above
the Burmeister lithium pegmatites. Targets A and B will be tested with the first drilling approved for
Jaegermeister, Target E will require additional PoW applications in order to test this anomaly.
The infill soil sampling for the Burmeister and Jaegermeister areas has concluded at this stage. Further
drill targeting is likely once the results of the seismic survey data interpretation become available. The two
seismic data lines run the length of the Burmeister deposit and take in Jaegermeister Targets E, A and C
as shown in Figure 1.
Next Steps
Following PoW approvals and ahead of drill rigs mobilising to site, the TG Metals field crew are on site
making preparations for drill pads and access tracks. Two RC drilling rigs will initially be deployed to catch
up on planned drilling which has been delayed due to weather and other factors.
Interpretation of the seismic survey results is well advanced and expected to conclude within two weeks.
As drilling results come to hand the geological model will be updated in conjunction with the seismic
interpretations of pegmatites and structural features. This will aid in ongoing refinement of drill planning
and assist in future ore body modelling.
Metallurgical testwork on Burmeister diamond drill core samples at Independent Metallurgical Operations
(IMO’s) facilities in Perth has advanced with initial ore sorting completed and next phase of DMS to
commence shortly. This will be followed by flotation tests on the composite samples. The aim of the
testwork is to determine which concentration methods are best suited to the unique high spodumene
mineralogy of the Burmeister ore and the proportions applicable to each technique. First results will be
reported in the coming weeks as various stages of testwork are finalised.
A remote weather station has been installed at Burmeister. This device will record ongoing weather and
climate information for 12 months and beyond. An important precursor for project development studies.
TG METALS LTD
ASX TG6
ABN 40 644 621 830
Level 2, 28 Ord Street
West Perth WA 6005
T: +61 8 6211 5099
W: www.tgmetals.com.au
3
ASX ANNOUNCEMENT
ASX ANNOUNCEMENT
I
RELEASED 6 JUNE 2024
________________________________________________________________
Figure 2 – Infill soil samples and anomalies Datum: Zone 51 (AGD84)
TG METALS LTD
ASX TG6
ABN 40 644 621 830
Level 2, 28 Ord Street
West Perth WA 6005
T: +61 8 6211 5099
W: www.tgmetals.com.au
4
ASX ANNOUNCEMENT
ASX ANNOUNCEMENT
I
RELEASED 6 JUNE 2024
________________________________________________________________
About TG Metals
TG Metals is an ASX listed company focused on exploring for lithium, nickel and gold at its wholly owned
Lake Johnston Project (Figure 3) in the stable jurisdiction of Western Australia. The Lake Johnston
Project boasts the significant Burmeister lithium deposit and proximity to current producing lithium mines,
processing plants and additional geochemical and geophysical targets for immediate exploration.
Figure 3 – Lake Johnston Project Location
Authorised for release by TG Metals Board of Directors.
Contact
Mr David Selfe
Chief Executive Officer
Email: info@tgmetals.com.au
TG METALS LTD
ASX TG6
ABN 40 644 621 830
Investor Relations
Evy Litopoulous
ResolveIR
Email: evy@resolveir.com
Level 2, 28 Ord Street
West Perth WA 6005
T: +61 8 6211 5099
W: www.tgmetals.com.au
5
ASX ANNOUNCEMENT
ASX ANNOUNCEMENT
I
RELEASED 6 JUNE 2024
________________________________________________________________
Competent Person Statement
Information in this announcement that relates to exploration results, exploration strategy, geology, drilling
and mineralisation is based on information compiled by Mr David Selfe who is a Fellow of the Australasian
Institute of Mining and Metallurgy. Mr Selfe has sufficient experience that is relevant to the style of
mineralisation and type of deposit under consideration and to the activities that he is undertaking to
qualify as a Competent Person as defined in the 2012 Edition of the Australasian Code for Reporting of
Exploration Results, Mineral Resources and Ore Reserves. Mr Selfe has consented to the inclusion in
this presentation of matters based on their information in the form and context in which it appears.
Forward Looking Statements
This announcement may contain certain statements that may constitute “forward looking statements”.
Such statements are only predictions and are subject to inherent risks and uncertainties, which could
cause actual values, results, performance achievements to differ materially from those expressed,
implied or projected in any forward looking statements.
Forward-looking statements are statements that are not historical facts. Words such as “expect(s)”,
“feel(s)”, “believe(s)”, “will”, “may”, “anticipate(s)” and similar expressions are intended to identify forwardlooking statements. These statements include, but are not limited to statements regarding future
production, resources or reserves and exploration results. All such statements are subject to certain risks
and uncertainties, many of which are difficult to predict and generally beyond the control of the Company,
that could cause actual results to differ materially from those expressed in, or implied or projected by,
the forward-looking information and statements. These risks and uncertainties include, but are not limited
to: (i) those relating to the interpretation of drill results, the geology, grade and continuity of mineral
deposits and conclusions of economic evaluations, (ii) risks relating to possible variations in reserves,
grade, planned mining dilution and ore loss, or recovery rates and changes in project parameters as
plans continue to be refined, (iii) the potential for delays in exploration or development activities or the
completion of feasibility studies, (iv) risks related to commodity price and foreign exchange rate
fluctuations, (v) risks related to failure to obtain adequate financing on a timely basis and on acceptable
terms or delays in obtaining governmental approvals or in the completion of development or construction
activities, and (vi) other risks and uncertainties related to the Company’s prospects, properties and
business strategy. Our audience is cautioned not to place undue reliance on these forward-looking
statements that speak only as of the date hereof, and we do not undertake any obligation to revise and
disseminate forward-looking statements to reflect events or circumstances after the date hereof, or to
reflect the occurrence of or non-occurrence of any events.
The Company believes that it has a reasonable basis for making the forward-looking Statements in the
presentation based on the information contained in this and previous ASX announcements.
The Company is not aware of any new information or data that materially affects the information included
in this ASX release, and the Company confirms that, to the best of its knowledge, all material assumptions
and technical parameters underpinning the exploration results in this release continue to apply and have
not materially changed.
TG METALS LTD
ASX TG6
ABN 40 644 621 830
Level 2, 28 Ord Street
West Perth WA 6005
T: +61 8 6211 5099
W: www.tgmetals.com.au
6
JORC Code, 2012 Edition – Table 1
Section 1 Sampling Techniques and Data
Criteria
JORC Code explanation
Commentary
Sampling
techniques
•
Nature and quality of sampling (eg cut channels, random chips, or
specific specialised industry standard measurement tools appropriate to
the minerals under investigation, such as down hole gamma sondes, or
handheld XRF instruments, etc). These examples should not be taken as
limiting the broad meaning of sampling.
Soil samples were collected by spade (at approx. 20cm) and sieved in the
field to 2mm to obtain up to 1kg of sample. The sample was placed in a
pre-numbered calico bag and dispatched to All Points Sampling Pty Ltd
(APS) warehouse in Wangara, WA. All samples were air dried in their
calicos, before being passed through a secondary sieve of 80 mesh using
a mechanical shaker to achieve a homogenised +100g sample. The +100g
sample was placed in a labelled kraft packet (with same identification
number on the calico). The kraft packets were sealed and submitted to
Jinning laboratories Pty Ltd (Jinning Laboratories) in Maddington, WA for
multielement analysis.
•
Include reference to measures taken to ensure sample
representivity and the appropriate calibration of any measurement tools
or systems used.
Soil sample spacing was conducted on a 200m x 50m grid to infill the
regional program conducted on a 400m x 100m grid. The infill and regional
soils program are appropriate for first past exploration conducted in the
Lake Johnston region, for sample size and method. The pattern is aligned
to the orientation of the target structures, whereby the sample points are
across strike and spread out along strike. Jinning Laboratories standards
and sample replicates were used by TG Metals Limited for QA/QC
reporting.
•
Aspects of the determination of mineralisation that are Material to
the Public Report.
No mineralisation was directly observed in the soil samples and
determination of anomalism was based on Jinning Laboratories
multielement analysis. All samples for assay were submitted to a Certified
Laboratory– Jinning Laboratories Pty Ltd.
In cases where ‘industry standard’ work has been done this would
be relatively simple (eg ‘reverse circulation drilling was used to obtain 1
m samples from which 3 kg was pulverised to produce a 30 g charge for
All samples were collected using a spade, penetrating 20cm of the surface
cover. The samples were sieved in the field to capture 2mm pass and up
to 1kg was placed in the pre-numbered calico. This sample was dispatched
•
1
Criteria
Drilling
techniques
Drill sample
recovery
JORC Code explanation
Commentary
fire assay’). In other cases more explanation may be required, such as
where there is coarse gold that has inherent sampling problems. Unusual
commodities or mineralisation types (eg submarine nodules) may
warrant disclosure of detailed information.
to Perth APS headquarters in Wangara where all samples were sun dried
before being passed through 80 mesh sieve using a mechanical shaker.
This generated an approx. 100 gram sample which was placed in labelled
kraft packet with the original sample id and dispatched to Jinning
Laboratories for multielement analysis -Mixed Acid-digest ICP-OES / ICPMS SCAN. Sample packets containing the sieved sample were sorted and
pulverized to less than 75 microns and only 7g of the homogenised sample
was used by Jinning Laboratories for analysis. The process involved the
use of nitric, perchloric and hydrofluoric acids in the attack. Dissolution
was achieved using hydrochloric acid. The use of hydrofluoric acid ensures
the breakdown of silicate minerals. Although the digest approaches total
dissolution of the sample, minor undissolved material can be encountered
as white precipitates (BaSO4 from barite, Al2O3 from bauxite and
sillimanite) and black grains (ilmenite, rutile, cassiterite, tantalite and
chromite). In mineral exploration, the Mixed-Acid Digest multi-element
analysis serves as a cost-effective proxy for mineralogy and offers valuable
insights into pathfinder elements.
Drill type (eg core, reverse circulation, open-hole hammer, rotary
air blast, auger, Bangka, sonic, etc) and details (eg core diameter, triple
or standard tube, depth of diamond tails, face-sampling bit or other
type, whether core is oriented and if so, by what method, etc).
No drilling results were included in this report.
.
•
•
•
Method of recording and assessing core and chip sample
recoveries and results assessed.
No drilling results were included in this report.
•
Measures taken to maximise sample recovery and ensure
representative nature of the samples.
No drilling results were included in this report.
Whether a relationship exists between sample recovery and grade
and whether sample bias may have occurred due to preferential
loss/gain of fine/coarse material.
No drilling results were included in this report.
•
2
Criteria
JORC Code explanation
Commentary
Logging
•
Whether core and chip samples have been geologically and
geotechnically logged to a level of detail to support appropriate Mineral
Resource estimation, mining studies and metallurgical studies.
Soil sample substrate/regolith was not recorded.
•
Whether logging is qualitative or quantitative in nature. Core (or
costean, channel, etc) photography.
All observations are qualitative in nature.
The total length and percentage of the relevant intersections
logged.
•
If core, whether cut or sawn and whether quarter, half or all core
taken.
No drilling results were included in this report.
•
If non-core, whether riffled, tube sampled, rotary split, etc and
whether sampled wet or dry.
No drilling results were included in this report.
•
For all sample types, the nature, quality and appropriateness of
the sample preparation technique.
Samples collected were hand sieved to 2mm in the field. Samples were
transported to All Points Sampling Pty Ltd, air dried and passed through a
secondary sieve of 80micron mesh using a mechanical shaker to achieve
a homogenised 100g sample to be submitted to Jinning Laboratories for
Mixed-Acid Digest. No further sample preparation was undertaken by All
Points Sampling prior to lab submission. The final sieve size of 80micron
mesh, approx. 100g was submitted to Jinning Laboratories for pulverising
and multi-acid digest analysis.
•
Quality control procedures adopted for all sub-sampling stages to
maximise representivity of samples.
All samples were hand sieved to 2mm size fraction in the field. Samples
were mechanically sieved in Perth to 80 mesh retaining +100g final size
fraction material for analysis. Standards were inserted by Jinning
Laboratories and sample replicates were anaylsed at a rate of 1:15.
Measures taken to ensure that the sampling is representative of
the in situ material collected, including for instance results for field
duplicate/second-half sampling.
Jinning sample replicates were measured at a rate of 1:15.
•
Subsampling
techniques
and sample
preparation
•
3
No drilling results were included in this report.
Criteria
Quality of
assay data
and
laboratory
tests
JORC Code explanation
Commentary
•
Whether sample sizes are appropriate to the grain size of the
material being sampled.
The sieved field sample of +1kg was appropriate for the grain size of the
surface material sample. The sample preparation technique and sample
size were considered appropriate for the material being sampled.
•
The nature, quality and appropriateness of the assaying and
laboratory procedures used and whether the technique is considered
partial or total.
All samples were sent to Jinning Laboratories for multielement analysis
(Mixed Acid-digest ICP-OES / ICP-MS SCAN) Sample packets were sorted
and pulverized to less than 75 microns with 7g of the homogenised sample
used for analysis. The process involved the use of nitric, perchloric and
hydrofluoric acids in the attack. Dissolution is achieved using hydrochloric
acid. The use of hydrofluoric acid ensures the breakdown of silicate
minerals. Although the digest approaches total dissolution of the sample,
minor undissolved material can be encountered. These include but not
limited to, white precipitates (BaSO4 from barite, Al2O3 from bauxite and
sillimanite) and black grains (ilmenite, rutile, cassiterite, tantalite and
chromite.). In mineral exploration, the Mixed-Acid Digest multi-element
analysis serves as a cost-effective proxy for mineralogy and offers valuable
insights into pathfinder elements. This analytical method was chosen for
consistency of data, as all soils completed by TG Metals Limited were
analysed by Mixed Acid Digest ICP-OES / ICP MS SCAN
•
For geophysical tools, spectrometers, handheld XRF instruments,
etc, the parameters used in determining the analysis including
instrument make and model, reading times, calibrations factors applied
and their derivation, etc.
No other instruments or tools were used during this program.
Nature of quality control procedures adopted (eg standards,
blanks, duplicates, external laboratory checks) and whether acceptable
levels of accuracy (ie lack of bias) and precision have been established.
Field replicates were anaylsed at a rate of 1:15. Jinning Laboratories
inserted a series of standards which were reported and assessed by TG
Metals Limited. First pass plots of sample replicate repeatability and
standard results recorded against expected were within TG Metals Limtied
acceptable range.
•
4
Criteria
JORC Code explanation
Commentary
Verification
of sampling
and
assaying
•
The verification of significant intersections by either independent
or alternative company personnel.
No drilling results were included in this report.
•
The use of twinned holes.
No drilling results were included in this report.
Documentation of primary data, data entry procedures, data
verification, data storage (physical and electronic) protocols.
•
•
Location of
data points
Data
spacing and
distribution
Discuss any adjustment to assay data.
Data was compiled and sorted in a master Microsoft Office Excel
spreadsheet formatted with headers, to be uploaded into TG Metals
Limited’s Micromine Database. Validation errors, if any, were rectified
during import. All TG Metals Limited data and the Micromine Database are
backed up regularly on a secure cloud storage.
All data below detection limit have been entered as zero. Assay data was
received as % or ppm dependent on the natural elemental abundance. Li
ppm was converted to Li2O for discussion purposes of similar industry
trends and exploration results.
Accuracy and quality of surveys used to locate drill holes (collar
and down-hole surveys), trenches, mine workings and other locations
used in Mineral Resource estimation.
•
All soil sample points were located using handheld GPS with a typical +3m accuracy.
•
Specification of the grid system used.
The field datum used was MGA_GDA94, Zone 51. All maps in this report
are referenced to GDA94, Zone 51.
•
Quality and adequacy of topographic control.
Topographic control was captured via an airborne imagery and LIDAR
survey conducted by TG Metals in April 2023. X, Y sample location data
was projected to the LIDAR DTM, and the subsequent Z value was
assigned to the soil sample location.
•
Data spacing for reporting of Exploration Results.
Soil sample spacing was conducted on a 200m x 50m grid which is
appropriate for first past exploration based on surface sampling completed
by TG Metals Limited in the Lake Johnston region. The pattern is aligned
on the orientation of MGA_GDA94, Zone 51 grid.
5
Criteria
JORC Code explanation
Commentary
Whether the data spacing and distribution is sufficient to establish
the degree of geological and grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation procedure(s) and classifications
applied.
Not applicable for soil sampling.
•
•
Orientation
of data in
relation to
geological
structure
Whether sample compositing has been applied.
No sample compositing was completed.
•
Whether the orientation of sampling achieves unbiased sampling
of possible structures and the extent to which this is known, considering
the deposit type.
Soil sample spacing was conducted on a 200m x 50m grid to infill the
regional program conducted on a 400m x 100m grid over the same area.
The infill and regional soils program are appropriate for first past
exploration based on sampling conducted in the Lake Johnston region, for
sample size and method. The pattern is based on the orientation of the
target structures, whereby the sample points are across strike and spread
out along strike.
If the relationship between the drilling orientation and the
orientation of key mineralised structures is considered to have
introduced a sampling bias, this should be assessed and reported if
material.
No drilling results were included in this report.
•
Sample
security
•
The measures taken to ensure sample security.
All samples collected by APS personnel were assigned a Sample ID which
was recorded against the geographical coordinates of the sample location.
The samples were placed in pre-numbered calico bag, tied and delivered
to the APS warehouse in Wangara. APS personnel sorted samples; air
dried in their calico before passing through 80 mesh using a mechanical
shaker. The final sieved component was placed in a pre-labelled kraft
packet with same sample identification number as that recorded on the
calico. Sample submission sheets and the sealed kraft packets were
delivered to Jinning Laboratories in Maddington for multielement analysis.
Jinning Laboratories strict sample tracking and checks ensured the sample
received was reported.
6
Criteria
JORC Code explanation
Commentary
Audits or
reviews
•
The results of any audits or reviews of sampling techniques and
data.
Standards and replicates were cross checked against expected values to
look for variances of greater than 2 standard deviations by Jinning
Laboratories and TG Metals Limited.
Section 2 Reporting of Exploration Results
Criteria
JORC Code explanation
Commentary
Mineral
Tenement
•
Type, reference name/number, location and ownership including
agreements or material issues with third parties such as joint ventures,
partnerships, overriding royalties, native title interests, historical sites,
wilderness or national park and environmental settings.
The reported soil sampling program is located on exploration licence
E63/1997. E63/1997 is 100% owned by TG Metals Limited. This area is
under ILUA legislation, and the claimants are the Ngadju people whom TG
Metals Limited has a Heritage Protection Agreement with. Permission was
gained to complete the non-ground disturbing program from the Ngadju
people prior by written approval within the area shown in the figures
contained in the body of this text. The area is also within PNR 84, a
proposed nature reserve since 1982.
• The security of the tenure held at the time of reporting along with
At the time of reporting there were no known impediments to obtaining a
license to operate in the area other than TG Metals Limited abiding to
conditions set by DEMIRS. The tenement is in good standing.
Exploration in the area previously concentrated on nickel and gold
conducted by Maggie Hays Nickel, Lionore International, Norilsk and White
Cliffs Nickel. No recorded lithium exploration has occurred in the subject
area in the past.
any known impediments to obtaining a licence to operate in the area.
Exploration
Done by
Other
Parties
•
Acknowledgement and appraisal of exploration by other parties.
Geology
•
Deposit type, geological setting and style of mineralization.
7
The deposit type sought is to be Lithium-Cesium-Tantalum (LCT)
spodumene bearing pegmatite. LCT mineralised pegmatites within the
Yilgarn Craton are commonly low lying intrusives hosted in
ultramafic/mafic greenstone sequences of upper greenschist or
amphibolite metamorphic facies.
Criteria
JORC Code explanation
Commentary
Drillhole
Information
•
A summary of all information material to the understanding of the
exploration results including a tabulation of the following information for
all Material drillholes: easting and northing of the drillhole collar
elevation or RL (Reduced Level – elevation above sea level in metres) of
the drillhole collar dip and azimuth of the hole down hole length and
interception depth hole length.
•
In reporting Exploration Results, weighting averaging techniques,
maximum and/or minimum grade truncations (e.g. cutting of high
grades) and cut-off grades are usually Material and should be stated
No drilling results were included in this release.
•
Where aggregate intercepts incorporate short lengths of high
grade results and longer lengths of low grade results, the procedure
used for such aggregation should be stated and some typical examples
of such aggregation should be shown in detail.
No data aggregation has been applied to the data in this release.
•
The assumptions used for any reporting of metal equivalent values
should be clearly stated.
Lithium ppm (Li ppm) was converted to Li2O ppm for discussion purposes
of the assay grades vs industry standards in reporting what constitutes
anomalous assays.
Data
Aggregation
Methods
None used.
Relationship
Between
Mineralisati
on Widths
and
Intercept
Widths
•
If the geometry of the mineralization with respect to the drillhole
angle is known, its nature should be reported.
No drilling results are included in this release to provide any inference
regarding the geometry of mineralisation.
Diagrams
•
Appropriate maps and sections (with scales) and tabulations of
intercepts should be included for any significant discovery being
reported. These should include but not be limited to a plan view of
drillhole collar locations and appropriate sectional views.
Refer to the figures in the body of the report.
8
Criteria
JORC Code explanation
Commentary
Balanced
Reporting
•
Where comprehensive reporting of all Exploration Results is not
practicable, representative reporting of both low and high grades and/or
widths should be practiced to avoid misleadin
Share your feedback
Discover