Drilling to Increase Laterite Gold Resource Commences
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
RELEASED 28 MAY 2026
*See Table 1
Drilling to Increase Laterite Gold Resource
Commences
Highlights
TG Metals Limited (TG Metals or the Company) (ASX:TG6) is pleased announce the
approval of a Program of Works (POW) for drilling on the laterite targets outside the current
Mineral Resource Estimate (MRE)* at the Van Uden Gold Project in Western Australia.
The POW covers an auger drilling program as the initial test of extensions to TG Metals’
surface laterite gold resource, currently defined in the MRE. The laterite resources at Van
Uden are well suited to onsite heap leaching as evidenced by the rapid gold recoveries seen
in the testwork and the exceptional physical characteristics (ASX announcement 30 April
2026).
These surface deposits require no pre-stripping, minimal handling and a potential onsite
facility means no transport costs. This delivers low mining costs, coupled with the low upfront
capital and operating costs associated with heap leach processing.
Laterite Gold Drilling
Figure 1 shows the existing MRE overlaid with soil anomaly contours and the planned drill
hole collars. This drilling is reconnaissance in nature, expected to be shallow (up to 5m deep)
and will be logged for laterite and pisolite content and analysed for gold.
If successful, the auger samples will to be used in subsequent metallurgical testwork for heap
leach suitability.
Drilling preparations are underway with the drilling rig expected to arrive onsite mid next week.
TG Metals CEO, Mr. David Selfe stated;
“Previous soil sampling has shown the potential to double the current laterite resource and
now we are testing that potential with drilling. Auger drilling is a quick and effective method of
testing surface mineralisation whilst providing relatively undisturbed samples for metallurgical
testing in addition to analytical. The physical characteristics of mineralisation are an important
consideration in heap leaching applications.
The outcome of this program is likely to provide considerable upside to the existing heap leach
study work which is well advanced. Independent heap leach and mining consultants have
been engaged to fastrack this development.”
■ Approvals granted for drilling additional laterite gold targets
■ Preparations underway
■ Laterite Heap Leach workstreams well advanced
ASX ANNOUNCEMENT I RELEASED 28 MAY 2026
________________________________________________________________
2
TG METALS LTD
ASX TG6
ABN 40 644 621 830
Level 2, Suite 3
28 Ord Street
West Perth WA 6005
T: +61 8 6211 5099
W: www.tgmetals.com.au
Figure 1 – Existing Laterite MRE, Generated Targets and Planned Drilling
ASX ANNOUNCEMENT I RELEASED 28 MAY 2026
________________________________________________________________
3
TG METALS LTD
ASX TG6
ABN 40 644 621 830
Level 2, Suite 3
28 Ord Street
West Perth WA 6005
T: +61 8 6211 5099
W: www.tgmetals.com.au
Heap Leach Workstreams
TG Metals has engaged heap leach consultants to refine the preliminary design of the leach
pads, associated Plant and infrastructure. This design will inform the capital cost
requirements.
Mine design and scheduling are advancing with the mine schedule to feed into the financial
model. In addition, mining contractors are being engaged for material movement quotes as
the mine schedule is being formed, including mobile equipment selection.
Column leach testwork is ongoing, with gold recoveries still continuing. Final cyanide
consumption, lime addition, water balance and residue composition will all feed into permitting
streams, financial model and final leach pad design.
Data compilation for permitting is underway and will be added to as other workstreams feed
into this critical path activity.
Next Steps
Whilst the workstreams are progressing:
• Drill testing of the additional laterite targets to commence next week.
• Sourcing of plant and equipment for Heap leach is advancing with new and used
opportunities.
• Finalisation of the site Infrastructure plan.
About The Van Uden Resource
The Van Uden gold MRE has 56% in the Indicated category allowing progression to mining
and processing studies in the near term. The surface Laterite is the current focus for heap
leach technology. The updated MRE below in Table 1 shows the current resource status:
Table 1: MRE – Van Uden Gold Deposit
NOTES: The Mineral Resources statement conforms to the Australasian Code for Reporting of Exploration
Results, Mineral Resources and Ore Reserves (JORC Code) 2012 Edition. All tonnages are dry metric tonnes.
The laterite portion of the mineralisation has been reported at a cut-off grade of 0.10 g/t Au by area within a
A$6,000/oz Au optimised pit shell. All other material types are reported at a cut-off grade of 0.30 g/t Au by area
within a A$6,000/oz Au optimised pit shell based on mining parameters and operating costs typical for Australian
open pit extraction deposits of a similar scale and geology.
Minor discrepancies may occur due to rounding of appropriate significant figures. The resources comply with the
Reasonable Prospects for Eventual Economic Extraction (RPEEE), a key principle in mineral resource reporting
that requires the competent person to demonstrate that a mineral deposit has the potential to be economically
extracted in the future
Material
Grade Grade Grade
(Au g/t) (Au g/t) (Au g/t)
Laterite 886,000 0.56 15,900 167,000 0.33 1,800 1,053,000 0.52 17,700
Oxide 1,976,000 1.15 73,300 414,000 0.91 12,100 2,390,000 1.11 85,400
Transition 1,115,000 1.07 38,300 740,000 1.01 24,100 1,855,000 1.05 62,400
Fresh 580,000 1.35 25,100 2,057,000 1.21 80,200 2,637,000 1.24 105,300
Total 4,557,000 1.04 152,600 3,378,000 1.09 118,200 7,935,000 1.06 270,800
Gold (oz)
Indicated Inferred Total
Mineral Resource Estimate Van Uden Gold Deposit - April 2026
Tonnes Gold (oz) Tonnes Gold (oz) Tonnes
4
ASX ASX ANNOUNCEMENT I RELEASED 28 MAY 2026
________________________________________________________________
TG METALS LTD
ASX TG6
ABN 40 644 621 830
Level 2, Suite 3
28 Ord Street
West Perth WA 6005
T: +61 8 6211 5099
W: www.tgmetals.com.au
About TG Metals
TG Metals is an ASX listed company focused on exploring and developing gold and lithium
assets at its wholly owned Lake Johnston Project and 80% owned Van Uden Gold Project in
the stable jurisdiction of Western Australia. The Lake Johnston Project hosts the Burmeister
high grade lithium deposit, Jaegermeister lithium pegmatites and several surrounding lithium
prospects. Burmeister is in proximity to four lithium processing plants and undeveloped
deposits. The Van Uden Gold Project contains past producing gold mines and is in proximity
to operating gold processing Plants, see Figure 2 below.
Authorised for release by TG Metals Board of Directors.
Contact Investor Relations
Mr David Selfe Evy Litopoulous
Chief Executive Officer ResolveIR
Email: info@tgmetals.com.au Email:evy@resolveir.com
Figure 2 – Location Map showing TG Metals’ Van Uden Gold Project
5
ASX ASX ANNOUNCEMENT I RELEASED 28 MAY 2026
________________________________________________________________
TG METALS LTD
ASX TG6
ABN 40 644 621 830
Level 2, Suite 3
28 Ord Street
West Perth WA 6005
T: +61 8 6211 5099
W: www.tgmetals.com.au
Competent Person Statement
Information in this announcement that relates to exploration results, exploration strategy, exploration
targets, geology, drilling and mineralisation is based on information compiled by Mr David Selfe who is a
Fellow of the Australasian Institute of Mining and Metallurgy. Mr Selfe has sufficient experience that is
relevant to the style of mineralisation and type of deposit under consideration and to the activities that
he is undertaking to qualify as a Competent Person as defined in the 2012 Edition of the Australasian
Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves. Mr Selfe has
consented to the inclusion in this report of matters based on their information in the form and context in
which it appears.
Forward Looking Statements
This announcement may contain certain statements that may constitute “forward looking statements”.
Such statements are only predictions and are subject to inherent risks and uncertainties, which could
cause actual values, results, performance achievements to differ materially from those expressed,
implied or projected in any forward looking statements.
Forward-looking statements are statements that are not historical facts. Words such as “expect(s)”,
“feel(s)”, “believe(s)”, “will”, “may”, “anticipate(s)” and similar expressions are intended to identify forward-
looking statements. These statements include, but are not limited to statements regarding future
production, resources or reserves and exploration results. All such statements are subject to certain risks
and uncertainties, many of which are difficult to predict and generally beyond the control of the Company,
that could cause actual results to differ materially from those expressed in, or implied or projected by,
the forward-looking information and statements. These risks and uncertainties include, but are not limited
to: (i) those relating to the interpretation of drill results, the geology, grade and continuity of mineral
deposits and conclusions of economic evaluations, (ii) risks relating to possible variations in reserves,
grade, planned mining dilution and ore loss, or recovery rates and changes in project parameters as
plans continue to be refined, (iii) the potential for delays in exploration or development activities or the
completion of feasibility studies, (iv) risks related to commodity price and foreign exchange rate
fluctuations, (v) risks related to failure to obtain adequate financing on a timely basis and on acceptable
terms or delays in obtaining governmental approvals or in the completion of development or construction
activities, and (vi) other risks and uncertainties related to the Company’s prospects, properties and
business strategy. Our audience is cautioned not to place undue reliance on these forward-looking
statements that speak only as of the date hereof, and we do not undertake any obligation to revise and
disseminate forward-looking statements to reflect events or circumstances after the date hereof, or to
reflect the occurrence of or non-occurrence of any events.
The Company believes that it has a reasonable basis for making the forward-looking Statements in the
presentation based on the information contained in this and previous ASX announcements.
The Company is not aware of any new information or data that materially affects the information included
in this ASX release, and the Company confirms that, to the best of its knowledge, all material assumptions
and technical parameters underpinning the exploration results in this release continue to apply and have
not materially changed.
Share your feedback
Discover