Notice of Annual General Meeting and Proxy Form
Released
Released
Announcement PDF
19 October 2023
Dear Shareholder
Annual General Meeting - Notice and Proxy Form
TG Metals Limited (Company) will be holding its annual general meeting of shareholders at 10.00am
(AWST) on Thursday, 23 November 2023 (Meeting) at Level 24, 44 St Georges Terrace, Perth, WA
6000.
The Company will not be sending hard copies of the Notice of Meeting (Notice) to shareholders, unless
the shareholder has made a valid election to receive such documents in hard copy. The Notice of
Meeting can be viewed and downloaded from the website link:
https://tgmetals.com.au/investors/asx-announcements/
Shareholders who have nominated an email address and have elected to receive electronic
communications from the Company, will also receive an email to their nominated email address with a
link to an electronic copy of the Notice of Meeting.
A copy of your personalised Proxy Form is enclosed for your convenience.
Shareholders who wish to participate and vote at the AGM are strongly encouraged to complete and
submit their proxies as early as possible. Proxy forms can be lodged online at
https://investor.automic.com.au/#/loginsah. Shareholders will be required to login to the Automic
website using the holding details as shown on the Proxy Form. Click on ‘Meetings’ – ‘Vote’. To use
the online lodgement facility, Shareholders will need their holder number (Securityholder Reference
Number (SRN) or Holder Identification Number (HIN)) as shown on the front of the Proxy Form.
Alternatively, please return the enclosed proxy form by:
post to:
Automic, GPO Box 5193, Sydney NSW 2001;
delivery to:
Automic, Level 5, 126 Phillip Street, Sydney NSW 2000;
email to:
meetings@automic.com.au; or
facsimile to:
+61 2 8583 3040
Your proxy voting instruction must be received by 10.00am (AWST) on Tuesday 21 November 2023,
being not later than 48 hours before the commencement of the Meeting. Any proxy voting instructions
received after that time will not be valid for the Meeting.
The Notice is important and should be read in its entirety. If you are in doubt as to the course of action
you should follow, you should consult your financial adviser, lawyer, accountant or other professional
adviser. If you have any difficulties obtaining a copy of the Notice please contact the Company's share
registry, Automic on, 1300 288 664 (within Australia) or +61 2 9698 5414 (overseas).
Yours faithfully
Richard Bevan
Chairperson
TG Metals Limited ACN 644 621 830
Level 24, 44 St Georges Terrace, Perth WA 6000
T +61 8 6211 5099 E info@tgmetals.com.au W www.tgmetals.com.au
TG Metals Limited
ACN 644 621 830
Notice of Annual General Meeting
Notice is given that the annual general meeting of the Company (Meeting) will be held at:
Time
10.00 am (AWST)
Date
Thursday, 23 November 2023
Place
Level 24, 44 St Georges Terrace
Perth WA 6000
Important: This Notice is an important document that should be read in its entirety. If you are in any doubt or
have any questions about this document, you should promptly consult your stockbroker, accountant or other
professional adviser.
Notice of Annual General Meeting
Notice is given that the annual general meeting of TG Metals Limited ACN 644 621 830 (Company) will be
held at 10.00am (AWST) on Thursday, 23 November 2023 at the offices of Trident Capital, Level 24, 44 St
Georges Terrace, Perth WA 6000.
Agenda
Annual Report
To table and consider the Annual Report of the Company for the financial year ended 30 June 2023,
which includes the Financial Report, the Directors' Report, the Remuneration Report and the
Auditor's Report.
1
Resolution 1 – Remuneration Report
To consider and, if thought fit, to pass, with or without amendment, the following resolution as a nonbinding resolution:
"That, for the purposes of section 250R(2) of the Corporations Act and for all other purposes,
approval is given for the adoption of the Remuneration Report as set out in the Annual
Report for the financial year ended 30 June 2023."
Note: The vote on this Resolution is advisory only and does not bind the Directors or the Company.
Voting Prohibition: In accordance with sections 250BD, 250R and 250V of the Corporations Act, a
vote on this Resolution must not be cast (in any capacity) by or on behalf of either of the following
persons: (a) a member of the Key Management Personnel, details of whose remuneration are
included in the Remuneration Report; or (b) a Closely Related Party of such a member, subject to
the applicable exceptions described in this Notice.
2
Resolution 2 – Re-election of Director – Mr Brett Smith
To consider and, if thought fit, to pass, with or without amendment, the following resolution as an
ordinary resolution:
"That, for the purposes of clause 11.1(c) of the Constitution and for all other purposes, Mr
Brett Smith retires by rotation and, being eligible, is re-elected as a Director as described in
the Explanatory Statement."
3
Resolution 3 – Approval of the Additional 10% Placement Capacity
To consider and, if thought fit, to pass, with or without amendment, the following resolution as a
special resolution:
"That, for the purposes of Listing Rule 7.1A and for all other purposes, approval is given for
the Company to issue Equity Securities under the Additional 10% Placement Capacity as
described in the Explanatory Statement."
2
Voting Exclusion: The Company will disregard any votes cast in favour of this Resolution if, at the
time of the Meeting, the Company is proposing to make an issue of Equity Securities under the
Additional 10% Placement Capacity, by or on behalf of any persons who are expected to participate
in, or who will obtain a material benefit as a result of, an issue under the Additional 10% Placement
Capacity (except a benefit solely by reason of being a holder of Shares) or any associate of those
persons.
4
Resolution 4 – Replacement of Constitution
To consider and, if thought fit, to pass, with or without amendment, the following resolution as a
special resolution:
"That, pursuant to and in accordance with section 136(2) of the Corporations Act and for all
other purposes, approval is given for the Company to repeal its existing Constitution and
adopt a new constitution in its place in the form of the document tabled at the Meeting and
signed by the Chair for the purposes of identification, with effect from the close of the
Meeting."
Voting exclusions and exceptions
Where a voting exclusion and/or voting prohibition applies to a Resolution, it is set out below the relevant
Resolution. The voting exclusions and/or voting prohibitions (as applicable) for the following Resolutions are
subject to the exceptions stated in the table below (as applicable).
Resolution
Exceptions
1
A person (voter) described in the voting prohibition may cast a vote on the Resolution as a
proxy if the vote is not cast on behalf of a person described in the voting exclusion and either:
3
(a)
the voter is appointed as a proxy by writing that specifies the way the proxy is to vote
on the Resolution; or
(b)
the voter is the Chair and the appointment of the Chair as proxy:
(i)
does not specify the way the proxy is to vote on the Resolution; and
(ii)
expressly authorises the Chair to exercise the proxy even if the Resolution is
connected directly or indirectly with the remuneration of a member of the Key
Management Personnel.
The voting exclusion does not apply to a vote cast in favour of the Resolution by:
(a)
a person as proxy or attorney for a person who is entitled to vote on the Resolution,
in accordance with directions given to the proxy or attorney to vote on the Resolution
in that way;
(b)
the Chair as proxy or attorney for a person who is entitled to vote on the Resolution,
in accordance with a direction given to the Chair to vote on the Resolution as the
Chair decides; or
(c)
a Shareholder acting solely in a nominee, trustee, custodial or other fiduciary capacity
on behalf of a beneficiary provided the following conditions are met:
(i)
the beneficiary provides written confirmation to the Shareholder that the
beneficiary is not excluded from voting, and is not an associate of a person
excluded from voting, on the Resolution; and
(ii)
the Shareholder votes on the Resolution in accordance with directions given
by the beneficiary to the Shareholder to vote in that way.
Voting entitlements
The Company has determined that, in accordance with section 7.11.37 of the Corporations Regulations 2001
(Cth), for the purposes of the Meeting, Shares will be taken to be held by the persons who are the registered
holders at 5:00pm (AWST) on Tuesday, 21 November 2023. Accordingly, share transfers registered after
that time will be disregarded in determining entitlements to attend and vote at the Meeting.
Voting instructions
(a)
Votes at the Meeting may be given personally or by proxy, attorney or representative.
(b)
A proxy need not be a Shareholder of the Company.
(c)
The Proxy Form sent with this Notice should be used for the Meeting.
(d)
Each Shareholder who is entitled to cast 2 or more votes at the Meeting may appoint up to 2 persons
to act as proxies and may specify the proportion or number of votes that each proxy is entitled to
exercise. If a Shareholder does not specify the proportion or number of that Shareholder's votes that
each proxy may exercise, then each proxy will be entitled to exercise half of that Shareholder's
votes. An additional Proxy Form will be supplied by the Company on request. No Shareholder may
appoint more than 2 proxies.
(e)
In the case of a Shareholder who is an individual, a Proxy Form must be executed under the hand of
the individual or their attorney duly authorised in writing and, in the case of a member that is a
corporation, a Proxy Form must be executed by the corporation under common seal, pursuant to
section 127 of the Corporations Act or under the hand of its duly authorised officer or attorney.
(f)
Any Shareholder may by power of attorney appoint an attorney to act on his or her behalf and such
power of attorney or a certified copy of it must be received by the Company in accordance with this
Notice.
(g)
Any corporation that is a Shareholder may appoint a representative to attend and vote for that
corporation at the Meeting. Appointments of corporate representatives must be received by the
Company in accordance with this Notice or handed in at the Meeting when registering as a corporate
representative.
(h)
Any directed proxies that are not voted on a poll at the Meeting by a Shareholder's appointed proxy
will automatically default to the Chair, who is required to vote proxies as directed on a poll.
(i)
A member of the Key Management Personnel (which includes each Director) will not be able to vote
as proxy on Resolution 1 unless the Shareholder directs it how to vote or, in the case of the Chair,
unless the Shareholder expressly authorises the Chair to do so.
(j)
If a Shareholder intends to appoint a member of the Key Management Personnel (other than the
Chair) as its proxy, the Shareholder should ensure that it directs the member of the Key
Management Personnel how to vote on Resolution 1.
(k)
If a Shareholder intends to appoint the Chair as its proxy for Resolution 1, the Shareholder can direct
the Chair how to vote by marking one of the boxes for Resolution 1 (e.g. if the Shareholder wishes to
vote 'for', 'against' or to 'abstain' from voting). If a Shareholder does not direct the Chair how to vote,
then by submitting the Proxy Form, the Shareholder will be expressly authorising the Chair to
exercise the proxy in respect of Resolution 1 even though it is connected to the remuneration of a
member of the Key Management Personnel.
(l)
Proxy Forms (including any instruments under which they have been executed) and powers of
attorney granted by Shareholders must be lodged with the Company's share registry,
Computershare:
(i)
by post to Automic Group, GPO Box 5193, Sydney NSW 2001;
(ii)
online by visiting https://investor.automic.com.au/#/loginsah; or
(iii)
by email to meetings@automicgroup.com.au,
so that they are received no later than 48 hours before the commencement of the Meeting.
(m)
The Chair intends to exercise all available proxies in favour of all Resolutions, unless the
Shareholder has expressly indicated a different voting intention.
(n)
If the Chair is appointed as your proxy and you have not specified the way the Chair is to vote on
Resolution 1 by signing and returning the Proxy Form, you are considered to have provided the
Chair with an express authorisation for the Chair to vote the proxy in accordance with the Chair's
intention, even though the Resolution is connected directly or indirectly with the remuneration of a
member of the Key Management Personnel of the Company.
Document components
This document includes this Notice and the accompanying Explanatory Statement and Proxy Form.
Authorisation
By order of the Board.
Richard Bevan
Chairperson
16 October 2023
Explanatory Statement
This Explanatory Statement sets out the information which the Directors believe is material to Shareholders
in deciding whether or not to pass the Resolutions.
The Explanatory Statement forms part of the Notice which should be read in its entirety. The Explanatory
Statement contains the terms and conditions on which the Resolutions will be voted.
The Explanatory Statement includes the following information to assist Shareholders in deciding how to vote
on the Resolutions:
A Proxy Form is located at the end of the Explanatory Statement.
1
General
This Notice and Explanatory Statement are being made available to Shareholders by electronic
means and the Company will not be dispatching physical copies of this Notice, other than to any
Shareholder who has elected to receive notices of meeting in hard copy only, or who otherwise
requests a hard copy of this Notice at least 48 hours before the Meeting.
The Notice can be viewed online and downloaded via:
2
(a)
the Company’s website at https://tgmetals.com.au/investors/asx-announcements/;
(b)
the Company’s ASX platform at www.asx.com.au/asx/share-price-research/company/TG6;
or
(c)
if the Shareholder has nominated an email address and has elected to receive electronic
communications from the Company, the link sent by the Company to the Shareholder’s
nominated email address.
Annual Report
In accordance with section 317 of the Corporations Act, Shareholders will be offered the opportunity
to discuss the Annual Report, including the Financial Report, the Directors' Report and the Auditor's
Report for the financial year ended 30 June 2023.
There is no requirement for Shareholders to approve the Annual Report.
At the Meeting, Shareholders will be offered the opportunity to:
(a)
discuss the Annual Report which is available online at www.tgmetals.com.au;
(b)
ask questions about, or comment on, the management of the Company; and
(c)
ask the auditor questions about the conduct of the audit and the preparation and content of
the Auditor's Report.
In addition to taking questions at the Meeting, written questions to the Chair about the management
of the Company, or to the Company's auditor about:
(a)
the preparation and content of the Auditor's Report;
(b)
the conduct of the audit;
(c)
accounting policies adopted by the Company in relation to the preparation of the financial
statements; and
(d)
the independence of the auditor in relation to the conduct of the audit,
may be submitted no later than 5 business days before the Meeting to the Company Secretary at the
Company's registered office.
3
Resolution 1 – Remuneration Report
3.1
Overview
Subsection 250R(2) of the Corporations Act requires that at a listed company’s annual general
meeting, a resolution that the Remuneration Report be adopted must be put to the Shareholders.
However, such a resolution is advisory only and does not bind the company or the directors of the
company. The Directors' Report contains the Remuneration Report which sets out the remuneration
policy for the Company and the remuneration arrangements in place for the executive Directors,
specified executives and non-executive Directors.
The chair of the meeting must allow a reasonable opportunity for its shareholders to ask questions
about or make comments on the remuneration report at the annual general meeting.
3.2
Voting consequences
In accordance with subsection 250R(3) of the Corporations Act, Resolution 1 is advisory only and
does not bind the Directors. If Resolution 1 is not passed, the Directors will not be required to alter
any of the arrangements in the Remuneration Report. However, the Board will actively consider the
outcome of the vote and comments made by Shareholders on the Remuneration Report when
reviewing the Company’s future remuneration policies and practices.
If the Company's Remuneration Report receives a 'no' vote of 25% or more (Strike) at two
consecutive annual general meetings, Shareholders will have the opportunity to remove the whole
Board, except the managing director (if any).
Where a resolution on the Remuneration Report receives a Strike at two consecutive annual general
meetings, the Company will be required to put to Shareholders at the second annual general
meeting a resolution on whether another meeting should be held (within 90 days) at which all
Directors (other than the managing director, if any) who were in office at the date of approval of the
applicable Directors' Report must stand for re-election.
3.3
Previous voting results
The Company's Remuneration Report did not receive a Strike at the 2022 annual general meeting. If
the Remuneration Report receives a Strike at this Meeting, Shareholders should be aware that if a
second Strike is received at the 2024 annual general meeting, this may result in the re-election of the
Board.
3.4
Board recommendation
The Chair will allow a reasonable opportunity for Shareholders as a whole to ask about, or make
comments on the Remuneration Report.
Resolution 1 is an ordinary resolution. The Board encourages Shareholders to vote on the adoption
of the Remuneration Report.
4
Resolution 2 – Re-election of Director – Mr Brett Smith
4.1
General
Clause 11.1(c) of the Constitution provides that one-third of the Directors and any other Director not
in such one-third who has held office for 3 years or more (except the Managing Director) must retire
from office at each annual general meeting (or if that is not a whole number, then the number
nearest one-third). Clause 11.1(e) provides that the Directors to retire at any annual general meeting
must be those who have been longest in office since their last election, but, as between persons who
became Directors on the same day, those to retire must (unless they otherwise agree among
themselves) be determined by lot.
Clause 11.1(d) of the Constitution provides that a Director who retires in accordance with Clause
11.1(c) is eligible for re-election. Accordingly, Mr Brett Smith will retire at the Meeting and being
eligible, seeks re-election as a Director.
Mr Smith has served as a director since 23 December 2021 and was last re-elected on 30 November
2022.
Accordingly, pursuant to Resolution 2, Mr Smith retires as a Director at the Meeting and being
eligible, seeks approval to be re-elected as a Director.
4.2
Mr Brett Smith
Mr Smith has more than 35 years’ experience as a geologist across a wide range of commodities
and global jurisdictions. He has over 20 years’ experience in investor engagement, corporate
management and board responsibilities with private and ASX-listed companies.
Mr Smith is currently the Managing Director of Corazon Mining Limited (ASX:CZN), a Perth based
company focused on nickel sulphide exploration and resource development in Canada and Australia.
Mr Smith has held directorships with the following listed companies in the past 3 years:
Company
Appointment
Status
Corazon Mining Limited
1 July 2010
Current
Aruma Resources Limited
1 August 2022
Current
Mr Smith has acknowledged to the Company that he will have sufficient time to fulfil his
responsibilities as a Director.
The Board considers Mr Smith to be an independent director, notwithstanding that he holds
Securities (being 2,300,000 Shares and 788,706 unlisted Options held through associated entities)
and has previously been issued 600,000 Management Options and 880,000 Performance Rights as
partial remuneration for services and to incentivise performance. The Board considers that the
number of Securities held by Mr Smith and his associates will not interfere, or reasonably be seen to
interfere, with Mr Smith’s capacity to bring an independent judgement to bear on issues before the
Board and to act in the best interest of the Company as a whole.
4.3
Board recommendation
Resolution 2 is an ordinary resolution.
The Board (excluding Mr Smith who has an interest in the outcome of Resolution 2) recommends
that Shareholders vote in favour of Resolution 2, due to Mr Smith’s extensive experience which is
relevant to the Company’s phase of growth, strong leadership and focus on delivering shareholder
returns. In addition, as an independent director, Mr Smith provides valuable contributions and insight
at Board level.
5
Resolution 3 – Approval of the Additional 10% Placement Capacity
5.1
General
Listing Rule 7.1A provides that an 'eligible entity' may seek shareholder approval by special
resolution passed at an annual general meeting to have the capacity to issue up to that number of
Equity Securities equal to 10% of its issued capital at the time of issue calculated in accordance with
the formula prescribed in Listing Rule 7.1A.2 (Additional 10% Placement Capacity) without using
that company's existing 15% annual placement capacity under Listing Rule 7.1 and without requiring
further shareholder approval prior to the issue.
The Company is seeking approval under Resolution 3 to have the flexibility to issue additional Equity
Securities under the Additional 10% Placement Capacity. As at the date of this Notice, no decision
has been made by the Company to undertake any issue of Equity Securities under the Additional
10% Placement Capacity if Shareholders approve this Resolution.
Resolution 3 seeks Shareholder approval by way of a special resolution to provide the Company the
ability to issue Equity Securities under the Additional 10% Placement Capacity during the Additional
10% Placement Period (refer to section 5.3(a) below). The number of Equity Securities to be issued
under the Additional 10% Placement Capacity will be determined in accordance with the formula
prescribed in Listing Rule 7.1A.2.
If Resolution 3 is passed, the Company will effectively be able to issue equity securities up to a
combined annual placement capacity of 25% under Listing Rules 7.1 and 7.1A (subject to certain
restrictions) without necessarily requiring prior Shareholder approval.
If Resolution 3 is not passed, the Company will not be able to access the Additional 10% Placement
Capacity to issue equity securities without Shareholder approval. This means the Company will only
have access to the 15% annual placement capacity for issuing equity securities without necessarily
requiring prior Shareholder approval under Listing Rule 7.1.
The Board recommends that Shareholders vote in favour of Resolution 3.
5.2
Listing Rule 7.1A
(a)
Eligible Entity
Under the Listing Rules, an 'eligible entity' is an entity which, as at the date of the relevant
resolution, is not included in the S&P/ASX300 Index and has a market capitalisation
(excluding restricted securities and securities quoted on a deferred settlement basis) equal
to or less than $300 million. The Company has a market capitalisation of $5,732,291 and is
currently an 'eligible entity'.
(b)
Special resolution
Resolution 3 is a special resolution and therefore requires approval of 75% of the votes cast
by Shareholders present and eligible to vote (in person, by proxy, by attorney or, in the case
of a corporate Shareholder, by a corporate representative).
(c)
Type of Securities which may be issued
Any Equity Securities issued under the Additional 10% Placement Capacity must be in the
same class as an existing quoted class of Equity Securities of the company.
As at the date of the Notice, the Company has on issue one quoted class of Equity
Securities; Shares (ASX:TG6).
(d)
Interaction with Listing Rule 7.1
The Additional 10% Placement Capacity under Listing Rule 7.1A is in addition to the
Company's 15% placement capacity under Listing Rule 7.1. Therefore, approval of this
Resolution will enable the Company to issue Equity Securities under Listing Rule 7.1A
without using its placement capacity under Listing Rule 7.1.
(e)
Effect of Resolution 3
The effect of Resolution 3 will be to allow the Directors to issue the Equity Securities under
Listing Rule 7.1A during the Additional 10% Placement Period without further Shareholder
approval or using the Company's 15% annual placement capacity under Listing Rule 7.1.
5.3
Information required by Listing Rule 7.3A
Pursuant to and in accordance with Listing Rule 7.3A, the following information is provided in relation
to the Additional 10% Placement Capacity:
(a)
Effective period
Shareholder approval of the Additional 10% Placement Capacity is valid from the date of the
Meeting and expires on the earlier of:
(i)
the date that is 12 months after the Meeting;
(ii)
the time and date of the Company's next annual general meeting; and
(iii)
the date that Shareholders approve a transaction under Listing Rule 11.1.2
(significant change to nature or scale of activities) or 11.2 (change involving main
undertaking),
(Additional 10% Placement Period).
(b)
Minimum issue price
The issue price of Equity Securities issued under the Additional 10% Placement Capacity
must be not less than 75% of the VWAP of Equity Securities in the same class calculated
over the 15 Trading Days on which trades in that class were recorded immediately before:
(i)
the date on which the issue price is agreed for Equity Securities; or
(ii)
if the Equity Securities are not issued within 10 Trading Days of the date in
paragraph (i) above, the date on which the Equity Securities are issued,
(Minimum Issue Price).
The Company will disclose this information when Equity Securities are issued under the
Additional 10% Placement Capacity.
(c)
Purpose of issue
The Company may only issue Equity Securities under the Additional 10% Placement
Capacity for cash consideration, which it may do to fund any one or more of the following:
(i)
general working capital expenses;
(ii)
activities associated with its current assets, including exploration expenditure on the
Lake Johnston Project;
(iii)
repayment of debt; and
(iv)
acquisition and investment in new assets (including associated expenses).
The Company will disclose this information when Equity Securities are issued under the
Additional 10% Placement Capacity.
(d)
Economic and voting dilution risks
If Equity Securities are issued under the Additional 10% Placement Capacity, there is a risk
of economic and voting dilution of Shareholders, including:
(i)
the market price for Equity Securities in the class of securities issued under the
Additional 10% Placement Capacity may be significantly lower on the issue date
than on the date of approval under Listing Rule 7.1A (i.e. the date of the Meeting);
and
(ii)
the Equity Securities may be issued under the Additional 10% Placement Capacity
at a discount to the market price for those Equity Securities on the issue date,
which may have an effect on the amount of funds raised from the issue of the Equity
Securities.
The table below illustrates:
(i)
the dilution of existing Shareholders on the basis of the market price of Shares and
the number of ordinary securities for variable 'A' calculated in accordance with the
formula in Listing Rule 7.1A.2 as at the date of the Notice (Variable A);
(ii)
two examples where variable 'A' has increased, by 50% and 100%. Variable 'A' is
based on the number of ordinary securities the Company has on issue as at the date
of this Notice. The number of ordinary securities on issue may increase as a result of
issues of ordinary securities that do not require Shareholder approval (e.g. a pro rata
entitlement offer or securities issued under a takeover offer) or future specific
placements under Listing Rule 7.1 that are approved at a future general meeting;
and
(iii)
two examples of where the issue price of ordinary securities has decreased by 50%
and increased by 50% as against the market price as at 2 October 2023.
Number of
Shares on
issue
(Variable 'A'
in Listing
Rule 7.1A2)
57,322,914
(current)
85,984,371
(50%
increase)
114,645,828
(100%
increase)
Issue price per Share
$0.05
(50% decrease)
$0.10
(current)
$0.15
(50% increase)
Shares issued –
10% voting
dilution
5,732,291
Shares
5,732,291
Shares
5,732,291
Shares
Funds raised
$286,615
$573,229
$859,844
Shares issued –
10% voting
dilution
8,598,437
Shares
8,598,437
Shares
8,598,437
Shares
Funds raised
$429,922
$859,844
$1,289,766
Shares issued –
10% voting
dilution
11,464,583
Shares
11,464,583
Shares
11,464,583
Shares
Funds raised
$573,229
$1,146,458
$1,719,687
Notes:
(e)
1
There are currently 57,322,914 Shares on issue (including Shares subject to escrow).
2
The issue price used is the closing price of the Shares on the ASX on 2 October 2023 of $0.10.
3
The Company issues the maximum possible number of Equity Securities under the Additional 10%
Placement Capacity.
4
The Company has not issued any Equity Securities in the 12 months prior to the Meeting that were not
issued under an exception in Listing Rule 7.2 or with approval under Listing Rule 7.1.
5
The issue of Equity Securities under the Additional 10% Placement Capacity consists only of Shares and
the consideration provided for those Shares is cash. It is assumed that no
Share your feedback
Discover