Announcement PDF ASX ANNOUNCEMENT RELEASED 9 SEPTEMBER 2025 SOIL ASSAY RESULTS EXTEND GOLD TARGETS TO OVER 6 KM AT VAN UDEN Highlights ■ Highly anomalous gold in soil results have more than doubled the strike of gold mineralisation at the Van Uden Gold Project to 6.5 kilometres ■ Results define targets to materially extend existing resources along strike ■ Analysis confirms new soil anomalies have been poorly tested by shallow historical drilling ■ Preparations for drilling at Van Uden complete TG Metals Limited (TG Metals or the Company) (ASX:TG6) is pleased to provide new gold assay results from historical soils sampling at the Van Uden Gold Project (Van Uden). The results confirm highly anomalous gold in soils on-trend to the north and south of the existing Van Uden mineral resource, within the project’s granted mining leases. Additional anomalies have been generated on the footwall and hanging wall of this mineralised trend, identified as the Van Uden Shear Zone. The assay results have increased the mineralised strike at Van Uden to approximately 6.5 kilometres, with the current MRE occupying a strike of 2.5 kilometres. Historical drilling shows the gold soil anomalies have been poorly tested. Much of the historical drilling1 to the north and south of the Van Uden deposit is shallow RAB (rotary air blast) drilling. Previous isolated gold intercepts in RC (reverse circulation) drilling were not followed up and presents a compelling opportunity for the Company to expand the defined gold mineralisation of the Van Uden deposit. Figure 1 shows the Van Uden deposit and the soil sampling coverage, with the new anomalies and historical drill holes displaying maximum gold values assayed. TG Metals CEO, Mr. David Selfe stated; “Van Uden is shaping up as a very large gold system. The potential to expand the existing gold resource along strike and down dip is enormous. With over 6 kilometres of strike now defined, we look forward to adding to this already substantial resource, which covers only 2.5 kilometres of strike, drilled to a relatively shallow depth averaging about 80 metres to the north and 120 metres in the south. This new data has given us another key strategic target to be incorporated into our drilling plans, which kicks off this month and will continue through the remainder of 2025.” 1. Historical drilling results restated ASX release 6 March 2025 ASX ANNOUNCEMENT I RELEASED 9 SEPTEMBER 2025 ________________________________________________________________ Figure 1 – Soil sampling results at Van Uden TG METALS LTD ASX TG6 ABN 40 644 621 830 Level 2, Suite 3 28 Ord Street West Perth WA 6005 T: +61 8 6211 5099 W: www.tgmetals.com.au 2 ASX ANNOUNCEMENT I RELEASED 9 SEPTEMBER 2025 ________________________________________________________________ Soil Sampling and Historical Drilling Soil sampling was conducted over the entire Mining Leases area as shown in Figure 1. This broad spaced grid of 200m x 200m soils was collected by Kidman Resources in 2019 and originally analysed for Lithium and associated elements. No gold assays were performed at that time. The pattern was selected to give whole of tenement coverage for Lithium exploration, see Figure 2. A closer spaced 200m x 100m pattern was infilled closer to the Van Uden shear. Recently, TG Metals assayed the soil pulps with 50g fire assay for gold and the results show that the Van Uden Shear has a lot more potential outside the known defined resource. Significant results above 10ppb Au are listed in Table A. The closer spaced soil samples assayed for gold clearly define the Van Uden shear and correlate well with the known Van Uden deposit gold mineralisation. This is sufficient for drill planning to test these anomalies, both north and south of the Van Uden gold deposit, for continuation of the Van Uden gold mineralisation. Whilst the gold in soil anomaly dissipates to the south, it is believed that this area of the tenure is influenced by transported soils which would impede the effectiveness of soil sampling for gold in this area. Even so, this represents 6.5 kilometres of continuous strike gold in soil anomaly from the northern tip of the granted Mining Leases towards the south. It is a substantial drilling target considering only 2.5 kilometres has been effectively tested with RC drilling that has defined the Van Uden resource. Historical drilling for gold was concentrated along the Van Uden gold deposit, Indicated and Inferred Mineral Resource of 6.35Mt at 1.1g/t Au for 227,140 oz gold (ASX release 5 June 2025, refer to Table B), with shallow and wide spaced drilling to the north and south which hasn’t effectively tested the remainder of the Van Uden shear. Figure 1 includes the historical drillhole collars with maximum assays gold value. These drillholes were re-stated in the acquisition announcement (ASX: 6 March 2025). Most of the drilling showing no gold values was shallow RAB drilling which failed to reach target depth and was too wide spaced to test the mineralised Van Uden Shear. Gold Anomalies The main gold in soil anomaly of significance is located on the Van Uden Shear. The shear is on the contact between mafics on the west and meta-sediments on the east. The shear variably dips to the east, trending steeper in the south and flatter in the north. The area has been well mapped in the past, with the newly defined gold in soil anomalies following the Van Uden Shear and defining the western margin. Sampling was conducted over the known Van Uden gold deposit, and the tenor of these assays correlate highly with the soil assays to the north and south, indicating that the potential gold mineralisation is similar to the known Van Uden deposit. These gold anomalies are high tenor along the 6.5km length of the shear tested. To the west of the Van Uden Shear, gold anomalies around circular magnetic features are also apparent. Further investigation is required to determine if these anomalous features are indicative of below surface gold mineralisation. They are of significance as there is peak gold in soil assay clusters above 30 ppb Au. TG METALS LTD ASX TG6 ABN 40 644 621 830 Level 2, Suite 3 28 Ord Street West Perth WA 6005 T: +61 8 6211 5099 W: www.tgmetals.com.au 3 ASX ANNOUNCEMENT I RELEASED 9 SEPTEMBER 2025 ________________________________________________________________ Figure 2 – Soil sample coverage at Van Uden TG METALS LTD ASX TG6 ABN 40 644 621 830 Level 2, Suite 3 28 Ord Street West Perth WA 6005 T: +61 8 6211 5099 W: www.tgmetals.com.au 4 ASX ANNOUNCEMENT I RELEASED 9 SEPTEMBER 2025 ________________________________________________________________ Follow-up Work Programmes of Work (POWs) have been lodged for drilling on the Van Uden deposit extensions as well as for the Gold City prospect. Infill soil sampling at Gold City has also been planned. Drilling preparations for within the Tasman pit are complete with surveying of the drill collar locations occurring in the past few days. The drilling contract has been awarded and drilling will commence upon mobilisation of a suitable drill rig, estimated to be around 17th September. Van Uden Gold Project Description The Project is located on the Forrestania Greenstone Belt, Figure 3, 90km east-northeast of Hyden and 120km south of Southern Cross. It is close to the Marvel Loch (producing) and Westonia - Edna May (care & maintenance) gold processing Plants and is 130km from the Company’s established Burmeister lithium deposit at the Lake Johnston Project. Van Uden Gold consists of an Indicated and Inferred Mineral Resource as per Table B below on four granted mining leases, four granted exploration licences, one exploration licence application and two miscellaneous licences (for haul roads). The Project lies to the west of the Mt Holland lithium mine, south of the operating Marvel Loch gold Plant, and southeast of the Edna May gold Plant. Mineral Resource Estimate for the Van Uden Gold Deposit - May 2025 Indicated Inferred Total Grade Grade Grade (Au g/t) Gold (Oz) Tonnes (Au g/t) Gold (Oz) Tonnes (Au g/t) Gold (Oz) Tonnes Laterite 234,000 0.9 6,940 525,000 0.7 11,800 759,000 0.7 18,740 Oxide 867,000 1.2 34,200 1,141,000 1.0 38,200 2,008,000 1.0 72,400 Transitional 291,000 1.1 10,700 770,000 1.1 26,500 1,061,000 1.1 37,200 Fresh 318,000 1.6 16,500 2,207,000 1.2 82,300 2,525,000 1.2 98,800 Total 1,710,000 1.2 68,340 4,643,000 1.2 158,800 6,353,000 1.1 227,140 Material Table B: MRE – Van Uden Gold Deposit The Mineral Resources statement conforms to the Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves (JORC Code) 2012 Edition. All tonnages are dry metric tonnes. It has been reported at a cut-off grade of 0.35 g/t Au by area within a A$5,000/oz Au optimised pit shell based on mining parameters and operating costs typical for Australian open pit extraction deposits of a similar scale and geology. Minor discrepancies may occur due to rounding of appropriate significant figures. The resources comply with the Reasonable Prospects for Eventual Economic Extraction (RPEEE), a key principle in mineral resource reporting that requires the qualified person to demonstrate that a mineral deposit has the potential to be economically extracted in the future. By applying the appropriate RPEEE the JORC 2012-compliant MRE will facilitate a smooth transition to the anticipated update to the JORC Code expected by the end of 2025. About TG Metals TG Metals is an ASX listed company focused on exploring and developing gold and lithium assets at its wholly owned Lake Johnston Project and 80% owned Van Uden Gold Project in the stable jurisdiction of Western Australia. The Lake Johnston Project hosts the Burmeister high grade lithium deposit, Jaegermeister lithium pegmatites and several surrounding lithium prospects. Burmeister is in proximity to four lithium processing plants and undeveloped deposits. The Van Uden Gold Project contains past producing gold mines and is in proximity TG METALS LTD ASX TG6 ABN 40 644 621 830 Level 2, Suite 3 28 Ord Street West Perth WA 6005 T: +61 8 6211 5099 W: www.tgmetals.com.au 5 ASX ANNOUNCEMENT I RELEASED 9 SEPTEMBER 2025 ________________________________________________________________ to operating gold processing Plants. Authorised for release by TG Metals Board of Directors. Contact Mr David Selfe Chief Executive Officer Email: info@tgmetals.com.au Investor Relations Evy Litopoulous ResolveIR Email: evy@resolveir.com Figure 3 – Location Map showing TG Metals’ Van Uden Gold Project TG METALS LTD ASX TG6 ABN 40 644 621 830 Level 2, Suite 3 28 Ord Street West Perth WA 6005 T: +61 8 6211 5099 W: www.tgmetals.com.au 6 ASX ASX ANNOUNCEMENT I RELEASED 9 SEPTEMBER 2025 ________________________________________________________________ Competent Person Statement Information in this announcement that relates to exploration results, exploration strategy, exploration targets, geology, drilling and mineralisation is based on information compiled by Mr David Selfe who is a Fellow of the Australasian Institute of Mining and Metallurgy and an employee of TG Metals Limited. Mr Selfe has sufficient experience that is relevant to the style of mineralisation and type of deposit under consideration and to the activities that he is undertaking to qualify as a Competent Person as defined in the 2012 Edition of the Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves. Mr Selfe has consented to the inclusion in this report of matters based on their information in the form and context in which it appears. Mr Selfe considers that the information in this announcement is an accurate representation of the available data and studies for the Van Uden Gold Project. Forward Looking Statements This announcement may contain certain statements that may constitute “forward looking statements”. Such statements are only predictions and are subject to inherent risks and uncertainties, which could cause actual values, results, performance achievements to differ materially from those expressed, implied or projected in any forward looking statements. Forward-looking statements are statements that are not historical facts. Words such as “expect(s)”, “feel(s)”, “believe(s)”, “will”, “may”, “anticipate(s)” and similar expressions are intended to identify forwardlooking statements. These statements include, but are not limited to statements regarding future production, resources or reserves and exploration results. All such statements are subject to certain risks and uncertainties, many of which are difficult to predict and generally beyond the control of the Company, that could cause actual results to differ materially from those expressed in, or implied or projected by, the forward-looking information and statements. These risks and uncertainties include, but are not limited to: (i) those relating to the interpretation of drill results, the geology, grade and continuity of mineral deposits and conclusions of economic evaluations, (ii) risks relating to possible variations in reserves, grade, planned mining dilution and ore loss, or recovery rates and changes in project parameters as plans continue to be refined, (iii) the potential for delays in exploration or development activities or the completion of feasibility studies, (iv) risks related to commodity price and foreign exchange rate fluctuations, (v) risks related to failure to obtain adequate financing on a timely basis and on acceptable terms or delays in obtaining governmental approvals or in the completion of development or construction activities, and (vi) other risks and uncertainties related to the Company’s prospects, properties and business strategy. Our audience is cautioned not to place undue reliance on these forward-looking statements that speak only as of the date hereof, and we do not undertake any obligation to revise and disseminate forward-looking statements to reflect events or circumstances after the date hereof, or to reflect the occurrence of or non-occurrence of any events. The Company believes that it has a reasonable basis for making the forward-looking Statements in the presentation based on the information contained in this and previous ASX announcements. The Company is not aware of any new information or data that materially affects the information included in this ASX release, and the Company confirms that, to the best of its knowledge, all material assumptions and technical parameters underpinning the exploration results in this release continue to apply and have not materially changed. TG METALS LTD ASX TG6 ABN 40 644 621 830 Level 2, Suite 3 28 Ord Street West Perth WA 6005 T: +61 8 6211 5099 W: www.tgmetals.com.au 7 ASX ASX ANNOUNCEMENT I RELEASED 9 SEPTEMBER 2025 ________________________________________________________________ Table A – Soil Sample Results >10ppb Au SiteID VAN0175 VAN0195 VAN0220 VAN0221 VAN0223 VAN0237 VAN0238 VAN0240 VAN0241 VAN0243 VAN0244 VAN0245 VAN0246 VAN0247 VAN0267 VAN0268 VAN0269 VAN0271 VAN0287 VAN0290 VAN0291 VAN0292 VAN0293 VAN0311 VAN0312 VAN0313 VAN0314 VAN0315 VAN0316 VAN0317 VAN0335 VAN0336 VAN0337 VAN0338 VAN0339 VAN0341 VAN0359 VAN0360 VAN0361 VAN0362 VAN0363 VAN0364 RL Au (mASL) (ppb) 750647.180 6437512.780 407.630 18 750866.750 6437796.410 402.300 11 750613.720 6437923.180 401.260 84 750519.670 6437890.770 403.640 87 750329.540 6437824.110 406.400 13 751493.870 6438437.130 403.740 12 751303.760 6438371.930 402.980 10 750925.350 6438242.370 403.210 12 750830.980 6438208.760 402.800 16 750641.670 6438144.860 402.430 27 750547.690 6438111.780 407.870 36 750451.600 6438077.210 410.800 17 750356.460 6438046.600 410.150 16 750262.430 6438015.410 407.820 25 750575.270 6438334.360 408.560 11 750483.460 6438301.010 411.840 25 750385.980 6438267.690 414.700 10 750197.510 6438203.320 411.230 14 750981.860 6438687.610 405.000 13 750607.030 6438553.840 411.350 10 750512.090 6438520.240 412.670 12 750415.590 6438491.990 412.860 15 750321.100 6438457.490 414.740 11 750918.550 6438875.710 406.800 34 750728.690 6438809.390 409.080 13 750637.080 6438776.920 412.190 12 750540.930 6438743.780 414.560 10 750445.600 6438709.630 414.960 17 750351.650 6438678.000 416.150 18 750255.980 6438645.400 417.290 17 750855.330 6439063.470 408.800 22 750665.870 6438998.140 412.700 14 750571.130 6438965.190 415.130 22 750475.000 6438929.280 415.840 35 750383.540 6438899.140 417.080 26 750192.520 6438835.500 422.830 13 750788.760 6439249.650 410.470 11 750596.990 6439186.810 412.150 19 750503.600 6439154.720 415.750 37 750408.850 6439121.440 418.530 52 750315.460 6439089.460 421.650 182 750220.000 6439053.860 423.370 18 Easting (m) Northing (m) TG METALS LTD ASX TG6 ABN 40 644 621 830 Level 2, Suite 3 28 Ord Street West Perth WA 6005 SiteID VAN0369 VAN0370 VAN0376 VAN0385 VAN0388 VAN0389 VAN0391 VAN0405 VAN0406 VAN0409 VAN0412 VAN0413 VAN0415 VAN0429 VAN0430 VAN0431 VAN0434 VAN0439 VAN0440 VAN0454 VAN0455 VAN0457 VAN0467 VAN0468 VAN0469 VAN0478 VAN0479 VAN0480 VAN0481 VAN0483 VAN0484 VAN0485 VAN0488 VAN0489 VAN0490 VAN0491 VAN0494 VAN0502 VAN0503 VAN0504 VAN0505 VAN0506 RL Au (mASL) (ppb) 749750.300 6438893.440 420.500 39 749652.310 6438862.450 416.940 10 749089.730 6438666.230 412.800 15 750440.120 6439340.270 416.800 10 749779.740 6439115.200 424.800 11 749682.810 6439085.070 422.990 10 749490.400 6439014.690 416.480 13 750373.600 6439532.770 420.140 21 750274.580 6439495.040 421.070 14 749995.060 6439402.620 427.650 13 749712.360 6439307.720 423.720 101 749617.660 6439272.430 422.800 32 749428.430 6439208.620 416.370 11 750309.440 6439721.880 421.390 42 750215.690 6439694.460 424.510 66 750121.650 6439655.500 428.670 350 749836.950 6439560.090 426.860 33 749363.870 6439397.070 416.800 11 749269.910 6439365.090 414.800 18 750154.440 6439875.170 428.280 26 750056.830 6439848.620 430.800 51 749775.700 6439748.790 425.240 10 748827.680 6439423.440 410.800 36 748731.960 6439388.950 410.800 15 748639.800 6439356.920 411.720 11 749991.580 6440035.650 430.030 42 749894.670 6440006.520 431.440 353 749806.180 6439970.640 429.680 38 749706.440 6439938.140 428.030 13 749512.600 6439875.330 424.300 10 749423.200 6439840.580 420.060 10 749329.160 6439809.150 418.800 11 749050.170 6439711.700 413.080 18 748950.100 6439677.090 412.800 18 748855.860 6439644.900 411.490 91 748759.840 6439613.300 412.800 15 748476.970 6439511.150 412.800 10 749831.890 6440190.490 436.260 11 749734.750 6440152.490 435.890 45 749641.820 6440124.260 433.230 24 749547.670 6440092.400 429.630 18 749359.650 6440028.450 422.990 40 Easting (m) Northing (m) T: +61 8 6211 5099 W: www.tgmetals.com.au 8 ASX ASX ANNOUNCEMENT I RELEASED 9 SEPTEMBER 2025 ________________________________________________________________ SiteID VAN0507 VAN0510 VAN0512 VAN0513 VAN0515 VAN0525 VAN0526 VAN0527 VAN0528 VAN0529 VAN0531 VAN0533 VAN0536 VAN0546 VAN0547 VAN0548 VAN0549 VAN0550 VAN0551 VAN0552 VAN0553 VAN0557 VAN0558 VAN0559 VAN0569 VAN0570 VAN0573 VAN0574 VAN0575 VAN0579 VAN0580 VAN0581 VAN0589 VAN0590 VAN0591 VAN0594 VAN0595 VAN0596 VAN0597 VAN0601 VAN0612 VAN0613 RL Au (mASL) (ppb) 749263.150 6439996.530 421.290 13 748982.100 6439899.900 413.790 21 748791.700 6439834.890 413.290 11 748695.880 6439799.950 412.890 10 748506.100 6439733.360 412.570 14 749667.570 6440349.770 435.640 11 749576.000 6440315.070 434.470 38 749482.710 6440280.080 435.700 73 749290.650 6440216.890 429.330 266 749198.480 6440185.090 429.520 47 749006.712 6440118.230 422.620 45 748819.778 6440056.010 417.450 12 748534.177 6439958.370 413.300 10 749608.970 6440535.080 438.310 11 749514.800 6440506.330 441.250 36 749414.330 6440474.620 448.340 59 749322.710 6440442.030 450.510 23 749231.440 6440408.540 442.590 17 749137.370 6440376.010 436.570 22 749040.940 6440343.420 432.990 54 748942.560 6440308.440 427.560 83 748568.550 6440178.460 418.800 10 748474.750 6440149.130 418.020 17 748377.580 6440113.340 419.560 12 749349.250 6440661.860 451.410 14 749250.810 6440628.210 456.140 20 748961.820 6440528.120 440.290 34 748879.260 6440499.180 434.560 71 748780.660 6440462.760 427.980 17 748408.070 6440336.740 426.400 31 748309.680 6440301.530 429.420 192 748220.190 6440270.760 429.390 17 749381.770 6440882.320 442.580 14 749193.700 6440820.810 448.240 10 749101.300 6440787.230 450.800 43 748805.980 6440690.950 437.540 29 748714.670 6440659.340 432.030 14 748626.250 6440622.450 426.160 13 748531.950 6440592.250 424.710 12 748156.680 6440460.730 436.580 10 748836.620 6440908.790 442.500 26 748750.320 6440885.280 441.080 69 Easting (m) Northing (m) TG METALS LTD ASX TG6 ABN 40 644 621 830 Level 2, Suite 3 28 Ord Street West Perth WA 6005 SiteID VAN0614 VAN0631 VAN0632 VAN0633 VAN0650 VAN0651 VAN0672 VAN0708 VAN0709 VAN0710 VAN0727 VAN0728 VAN0746 VAN0761 VAN0762 VAN0763 VAN0779 VAN0780 VAN0781 VAN0782 VAN0796 VAN0797 VAN0798 VAN0812 VAN0828 VAN0829 RL Au (mASL) (ppb) 748650.070 6440839.570 433.370 68 748777.360 6441094.890 441.980 26 748683.200 6441066.570 440.180 34 748589.150 6441034.920 434.130 18 748712.300 6441287.120 440.800 15 748620.270 6441257.410 438.390 11 748362.660 6441378.790 433.870 12 748328.780 6441788.400 444.800 74 748235.120 6441757.620 443.950 25 748138.500 6441725.700 439.700 19 748169.330 6441947.870 446.840 20 748072.070 6441916.840 445.030 12 747915.360 6442072.580 448.800 20 748033.450 6442322.350 450.800 33 747944.440 6442292.900 450.880 63 747850.240 6442263.250 449.870 37 747784.320 6442448.500 454.500 12 747689.570 6442415.740 451.550 31 747592.210 6442384.610 449.580 11 747499.840 6442352.570 446.000 13 747623.480 6442605.770 451.230 14 747527.330 6442569.830 448.840 13 747436.130 6442539.760 444.390 26 747561.530 6442795.580 450.430 11 747495.000 6442983.170 454.910 53 747400.440 6442950.740 456.450 20 Easting (m) Northing (m) T: +61 8 6211 5099 W: www.tgmetals.com.au 9 JORC Code, 2012 Edition – Table 1 Section 1 Sampling Techniques and Data Criteria JORC Code explanation Commentary Sampling techniques • Nature and quality of sampling (eg cut channels, random chips, or specific specialised industry standard measurement tools appropriate to the minerals under investigation, such as down hole gamma sondes, or handheld XRF instruments, etc). These examples should not be taken as limiting the broad meaning of sampling. Soil samples were collected by spade (at approx. 20cm) and sieved in the field to pass 2mm sieve to obtain up to 1kg of sample. The sample was placed in a pre-numbered calico bag and dispatched to Australian Laboratory Services Pty Ltd (ALS) located in Perth WA, for low detection level gold analysis by fire assay. • Include reference to measures taken to ensure sample representivity and the appropriate calibration of any measurement tools or systems used. Soil sampling was conducted on a 200m x 200m over all 4 Mine leases and tightened to 200m x 100m over the Van Uden Shear. The patter was oriented E-W. TG Metals Limited inserted gold standard and sample duplicate every 50 samples. ALS standards and laboratory replicates were reported and used by TG Metals Limited for QA/QC reporting. • Aspects of the determination of mineralisation that are Material to the Public Report. No mineralisation was observed in the soil samples results and determination of anomalism was based on ALS assay results. All samples for assay were submitted to aa Certified Laboratory – Australian Laboratory Services Pty Ltd. • In cases where ‘industry standard’ work has been done this would be relatively simple (eg ‘reverse circulation drilling was used to obtain 1 m samples from which 3 kg was pulverised to produce a 30 g charge for fire assay’). In other cases more explanation may be required, such as where there is coarse gold that has inherent sampling problems. Unusual commodities or mineralisation types (eg submarine nodules) may warrant disclosure of detailed information. All samples dispatched to ALS for Au by fire assay and Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) were homogenised and pulverized. 50g of sample was mixed with flux composed of PbO and SiO2 and variable amounts of borax, soda ash and other reagents. The flux and sample mix were then heated at high temperature (>1,000°C) to decompose rock lattices and allow gold within the sample to be collected into a lead button. The button was placed in a porous cupel and heated again in an oxidising environment to convert lead to lead oxide that is absorbed into the cupel, leaving the precious metals behind as a doré bead or prill. The gold content of the prill is then determined/measured by ICPAES analytical technique. 1 Criteria JORC Code explanation Drilling techniques • Drill type (eg core, reverse circulation, open-hole hammer, rotary air blast, auger, Bangka, sonic, etc) and details (eg core diameter, triple or standard tube, depth of diamond tails, face-sampling bit or other type, whether core is oriented and if so, by what method, etc). No drilling results were included in this report. Drill sample recovery • Method of recording and assessing core and chip sample recoveries and results assessed. No drilling results were included in this report. • Measures taken to maximise sample representative nature of the samples. ensure No drilling results were included in this report. • Whether a relationship exists between sample recovery and grade and whether sample bias may have occurred due to preferential loss/gain of fine/coarse material. Whether core and chip samples have been geologically and geotechnically logged to a level of detail to support appropriate Mineral Resource estimation, mining studies and metallurgical studies. No drilling results were included in this report. • Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc) photography. All observations are qualitative in nature. • The total length and percentage of the relevant intersections logged. No drilling results were included in this report. • If core, whether cut or sawn and whether quarter, half or all core taken. No drilling results were included in this report. • If non-core, whether riffled, tube sampled, rotary split, etc and whether sampled wet or dry. No drilling results were included in this report. • For all sample types, the nature, quality and appropriateness of the sample preparation technique. Quality control procedures adopted for all sub-sampling stages to Samples collected in the field were hand sieved to pass 2mm, with the fines collected and coarse rejected. Samples were transported to ALS for analysis that were homoegenised and pulverised in the laboratory. Logging Subsampling techniques and sample preparation • • Commentary recovery and 2 Soil sample substrate/regolith was recorded. Criteria JORC Code explanation maximise representivity of samples. Industry gold standards were inserted by ALS. Laboratory replicates were measured and reported. TG Metals sample duplicates and gold standard were inserted at the 50th sample interval Measures taken to ensure that the sampling is representative of the in situ material collected, including for instance results for field duplicate/second-half sampling. Whether sample sizes are appropriate to the grain size of the material being sampled. The sieved field sample of +1kg was appropriate for the grain size of the surface material. • The nature, quality and appropriateness of the assaying and laboratory procedures used and whether the technique is considered partial or total. All samples dispatched to ALS were analysed for gold by fire assay using ICP-AES. Samples were homogenised and pulverised from which 50g of sample was mixed with flux composed of PbO and SiO2 with variable amounts of borax, soda ash and other reagents. The flux and sample were mixed, then heated at high temperature (>1,000°C) to decompose rock lattices and allow gold within the sample to be collected into a lead button. The button was placed in a porous cupel and heated again in an oxidising environment to convert lead to lead oxide that is absorbed into the cupel, leaving the precious metals behind as a doré bead or prill. The gold content of the prill is then determined by ICP-AES. This analytical method was chosen to detect low level gold as advised by ALS. • For geophysical tools, spectrometers, handheld XRF instruments, etc, the parameters used in determining the analysis including instrument make and model, reading times, calibrations factors applied and their derivation, etc. No other instruments or tools were used during this program. • Nature of quality control procedures adopted (eg standards, blanks, duplicates, external laboratory checks) and whether acceptable levels of accuracy (ie lack of bias) and precision have been established. First pass plots of sample replicate repeatability and standard results recorded against expected were within TG Metals Limtied acceptable range. • The verification of significant intersections by either independent or alternative company personnel. No drilling results were included in this report. • • Quality of assay data and laboratory tests Verification of sampling Commentary 3 The sample preparation technique and sample size were considered appropriate for the material being sampled. Criteria JORC Code explanation and assaying • The use of twinned holes. No drilling results were included in this report. • Documentation of primary data, data entry procedures, data verification, data storage (physical and electronic) protocols. Data was collated in Microsoft Office Excel, formatted with headers and uploaded into TG Metals Limited Micromine Database. Validation errors, if any, were rectified during import. All TG Metals Limited data and the Microcmine Database are backed up regularly on a secure cloud storage. • Discuss any adjustment to assay